|
Crimper Heads need to be precisely matched to the Dimension of the Vial ( “lip” OD / thickness ); cap ( height (outer), height(inner), OD; Stopper OD / ID and Lip thickness
Otherwise Crimp finish might be compromise > buckled sides or ineffective crimp
15 and 20mm are almost Universal . . . And vice versa !
32mm FO Caps are the extreme; Kebby needs to customise the Crimp Heads to suit your samples ( 8 each of the Vial “set”) is required > via us and Exoport Freight is added )
for a “Proper” Crimp
- under “rolled” finish surface > some minor rippling is inevitable !
- > with moderate hand “twisting pressure” the Alum CAP should NOT rotate
( but the Plastic of the FO Type ) obviously will ! )
If caps / stoppers, vials are purchased from other 3rd part OEM\Supplier WE CAN NOT GUARANTE OUR CRIMPERS Or ANY other brand ) WILL WORK ! )
IF In any doubt ? > send us your samples ! . . . to test !
|
- ALL Rights Reserved !
