|
|
 |
|
|
|
|
THIS site >: NAV BARS may require FLASH - a Site for PC Eyes
& Not for “Apples”(?)( but see fully compatible chromalytic.net.au)
|
|
|
|
|
Syringe Heater Kit for Any Syringe >15mmDiam
|
|
|
|
|
Model: SYRINGE-HEATER-KIT
Description:
Heating device for syringes that require temperature-controlled dispensing
Heats syringe to approximately 185øC
|
|
|
|
|
|
Compatiblity Notes:
- Heating syringes over 100øC with NE-300, NE-500, NE-1000 & NE-4000 model syringe pumps requires an affordable customized pump.
- If you are in a country where the voltage is above 120V, you must purchase a step-down transformer with the Syringe Heater. For our Australian version an appropriate Transformer is supplied
Digitally set the heater set-point
Temperature sensor in heating pad
Set-point retained in memory
Controller will heat the syringe and hold the set temperature using an on/off or PID control algorithm
Multiple syringe heater pads can be attached to the control unit
Heated syringe can be mounted on a syringe pump
Syringe Heater Kit includes Control-Unit power cable and Primary-Syringe-Heater-Pad
|
|
|
|
|
|
|
Model: HEATING-PAD2+
Description:
For attaching additional, up to sixteen total, heating pads to SYRINGE-HEATER-KIT
Includes a Y-adapter to connect to primary heating pad
Temperature sensed in primary heating pad only
|
|
Note:
Heater pad measures 75 mm x 75 mm
Each syringe heater Control-Unit uses only the Primary-Heating-Pad to sense temperature. All Secondary-Heater-Pads connected to that Control-Unit function according to temperature at the Primary-Heater-Pad. For different temperatures or variable environments, use separate Control-Unites with Primary-Heater-Pads.
Plugging more than 16 Syringe-Heater-Pads onto one Controller is not recommended
|
|
|
|
SITE Product DETAIL
- Chromalytic Technology Pty Ltd 1995-2018+ : All rights reserved: OEM Supplier : Trademarks, Patents. logos apply !
