HOME

* Or 4 a smaller screen Laptop
ALT Home >less cluttered View

Now “Mobile Friendly”

Specialists in Chromatography / Fluid Transfer Products - Distributors in Australia . . . for ALL your Laboratory Equipment Needs ?

THESE site >: NAV BARS may require FLASH - a Site for PC Eyes 
& Not for “Apples”(?)( but see fully compatible chromalytic.net.au)

* redundant PDF, Older Flip progessively being relaced bt FlipHTML5

access to this “detailed” page from a mobile Now auto-reverts to our  MobileA8.htm HomePage>
>see chromtech.net.au/mob/  DIR Listing > an upgrade Mobile version (with /body_pages.htm)

ALT Home ( Extended )
* m_AltHome2015-19 mobile

NewEra Pump Accessories
Update 2015

NEW >2013+

• NE-9000 HeadUpgrade - 4 roller 100ml/min max 1/14x1/16”ID Tube

• NE-1010 High(er) Pressure

• NE-1002X Microfluidics Pump High(er)pressure,microstep

• Double SyringePump NE-4000

Syringe Heaters (coming)
Ana-Box
SyringePumpPro S’ware

NE Model: SYRINGE-HEATER-Kit
Description:
Heating device for syringes that require temperature-controlled dispensing
Heats syringe to approximately 185øC

Compatiblity Notes:

• Heating syringes over 100øC with NE-300, NE-500, NE-1000 & NE-4000 model syringe pumps requires an affordable customized pump.
  - In Australia a step-down transformer 220VAC to 110VAC is required /supplied as option

• Digitally set the heater set-point

• Temperature sensor in heating pad

• Se-tpoint retained in memory

Controller will heat the syringe and hold the set temperature using an on/off or PID control algorithm
Multiple syringe heater pads can be attached to the control unit
Heated syringe can be mounted on a syringe pump
Syringe Heater Kit includes Control-Unit power cable and Primary-Syringe-Heater-Pad

NOW AVAILABLE April 2012 . . . UPGRADED !

NE Model: HEATING-PAD2+
Description:
For attaching additional, up to sixteen total, heating pads to SYRINGE-HEATER-KIT
Includes a Y-adapter to connect to primary heating pad
Temperature sensed in primary heating pad only
 
Note:
Heater pad measures 75 mm x 75 mm
Each syringe heater Control-Unit uses only the Primary-Heating-Pad to sense temperature. All Secondary-Heater-Pads connected to that Control-Unit function according to temperature at the Primary-Heater-Pad.
For different temperatures or variable environments, use separate Control-Units with Primary-Heater-Pads.
Plugging more than 16 Syringe-Heater-Pads onto one Controller is not recommended


*** Not for clinical use on humans ***

Complete Heating Pad and its’ Temperature Controller - mounted on a 60cc Syringe fittied to a NE Syringe Pump

- Syringe and pump supplied as extras

Chromtechs’ INNOVATIVE “Mobile” Web Design

Latest Update CT-Catalogs2019 SlideShow > FlipHTML5 NAV

over the years some Catalog Products have been de-listed from catalogs even some Suppliers are “Gone” ! - but still be available from original OEMS or from alternative Suppliers elsewhere > ASK!

Prices & Availability are always in a “state of flux”
& out of (our) control !